Hale Pet Door Wall Mount

Hale Pet Door Wall Mounts are superior quality pet doors perfect for both dogs and cats. Installing a pet door into your wall is a home improvement decision, and it is something you shouldn’t cheap out on. Hale Pet Door’s use of high-quality material and meticulous attention to detail make their products last many years with constant use. Going for a cheaper big box brand causes pet door owner to change parts every couple months, costing more in the long run.

Hale Pet Doors are also constructed with energy efficiency and insulation in mind. Hale Pet Doors will save you on energy bills compared to lower end models while keeping your house insulated and sealed from any outside elements.

Hale Pet Door for Walls

The Hale Pet Door is one the easiest wall mount pet doors to install. It’s self-framing design allows it to be installed in almost any type of wall, whether it is in the interior or exterior of your home. All that needs to be done is the wall thickness needs to be measured, and a wall tunnel needs to be cut to fit that measurement. The outer frame can then be attached with screws. The standard tunnel length included is 10 inches long, and can be cut anywhere between 2 to 10 inches thick. There is also an oversize option that can accommodate wall thicknesses up to 16 inches.

Flashing is installed underneath the wall tunnel to divert any moisture or water back outside the wall to prevent any water from entering the house wall. Also, Hale includes an olefin nylon carpet that is both mildew and mold resistant to line the sides and bottom of the tunnel, keeping your house clean from your pet’s dirty paws. The carpet can easily be cleaned with a vacuum cleaner.

All Hale Pet Door Wall Mounts also include a free raincap which is an awning like attachment that is placed on the top of the Hale pet door frame. The Hale raincap keeps water from entering the pet door from rain!

Sizing Chart

Size	Flap Opening	Rough Opening	Tip to Tip	Pet Weight	Pet Shoulder Height	Breed Examples
Small	5 1/2" x 7 1/2"	7 3/8" x 9 3/8"	8 3/8" x 10 3/8"	Very small cats up to 8 lbs.	Up to 7"	Cats (only very small)
Small Medium	6 1/2" x 9 1/2"	8 1/2" x 11 1/2"	9 9/16" x 12 9/16"	Most cats, small dogs 6-12 lbs.	9"-13"	Cats, Chihuahua, Dachshund, Mini Poodle
Tall Small Medium	6 1/2" x 12 1/2"	8 1/2" x 14 1/2"	9 9/16" x 15 3/8"	Dogs 12-25 lbs	12"-15"	Mini Pinscher, Maltese
Medium	8 1/2" x 12 1/2"	10 1/2" x 14 1/2"	11 9/16" x 15 3/8"	Dogs 10-35 lbs.	12"-15"	Terriers, Pug, Corgi, Shiba Inu
Tall Medium	8 1/2" x 16"	10 1/2" x 18"	11 9/16" x 19 1/16"	Tall Dogs 30-45 lbs.	15"-20"	Cocker Spaniel, Sheltie, Beagle
Large	11" x 16"	13" x 18"	14 1/16" x 19 1/16"	Dogs 40-55 lbs.	15"-20"	Basset, Chow, Keeshond, Husky
Tall Large	11" x 19 1/2"	13" x 21 5/8"	14 1/16" x 22 9/16"	Taller Dogs 50-95 lbs.	21"-24"	German Shepherd, Labrador Retriever
Tall Large Plus	11" x 23 1/2"	13" x 25 5/8"	14 1/16" x 26 9/16"	Tall slender dogs to 110 lbs.	25"-27"	Standard Poodle, Irish Setter, Greyhound
Extra Tall Large	11" x 27 1/2"	13" x 29 5/8"	14 1/16" x 30 9/16"	Very tall, slender dogs to 120 lbs.	24"-31"	Afghan, Irish Wolfhound, Borzoi
Extra Large	14" x 19 1/2"	16" x 21 5/8"	17 1/16" x 22 9/16"	Large dogs to 120 lbs.	22"-24"	Rottweiler, Akita, Bulldog
Extra Large Plus	14" x 23 1/2"	16" x 25 5/8"	17 1/16" x 26 9/16"	Larger dogs to 150 lbs.	25"-27"	St. Bernard, Newfoundland
Giant	15 1/2" x 27 1/2"	17 5/8" x 29 5/8"	18 9/16" x 30 9/16"	Most Giant Breeds	25"-31"	Great Dane, Mastiff, Great Pyrenees

Why Hale Pet Door Wall Mounts are top rated

Strong & Durable – All Hale Pet Wall Mounts doors are built with longevity in mind. Most pet doors in the market today that can be found in big box stores are not sturdy and generally have some sort of breakage after a year of use. A pet door is essentially a home improvement item. You wouldn’t cheap out on a new toilet would you? The Hale pet door frames are made of heavy-duty extruded aluminum with steel reinforced corners.
Energy Efficient to save you money – The Hale Pet Door Wall Mount flaps are weather resistant and utilize alnico magnets and nylon pile weather stripping around the frame of the pet door. Choosing the double flap option for the Hale Pet Door Wall Mount adds an extra layer of insulation and energy efficiency even in the most extreme environments.
Twelve sizing options for versatility – Hale Pet Door is the only pet door manufacturer that allows customers to choose from 12 different sizes for the frame, making it easy for customers to find a size that fits anything from a small cat to a large Great Dane.
Extra secure – All Hale Pet Doors include a security cover with their purchase. The security covers are made of King Starboard Polymer which makes this cover fire, shock, and impact resistant. The Hale locking cover is reinforced with a strong steel pin lock that is attached to the frame, which prevents the locking cover from being removed or opened from the outside.

Keeps Your House and Door Dry and Clean - The included rain cap, rain resistant cover, wall tunnel, flap, and caulking all work in harmony to prevent any your home from water intrusion. They also help protect from wind, dust, debris, and the elements.
Keeps outside elements out – The Hale Pet door keeps the inside of your house clean with its design. The flap on the pet door itself utilizes alnico magnets for a strong sealing value, as well as nylon weather pile to keep other elements out. The wall tunnel itself makes it challenging for outside elements to reach the inside of your house. The included raincap that mounts on top of the frame keeps rain from falling in.
5 year no fault warranty – The Hale Pet door is backed by a comprehensive 5 year no fault warranty.
Made in the USA – All Hale Pet Doors are designed and manufactured in the USA for quality purposes!

Product Options

Flap Type – Choose from a single or double flap option. Double flap adds an extra layer of insulation and added energy efficient value.
Flap Size – Hale provides 12 different sizes, from small to giant for pets of all sizes.
Frame Color – Choose from four different colors: Brush Aluminum, Beige, Dark Bronze, or White. Please note that the security cover color will be a complimentary color of the frame color you choose.
Tunnel Length – The Hale Pet Door Wall Mount includes a standard 10” tunnel that fits walls anywhere between 2” to 10”. There is also an optional 16” tunnel unit that can be ordered for walls that are deeper.
Load direction of the security cover – Standard loading security covers go from the top of the frame to the bottom. Side load is also available for both left and right directions if there is an obstruction above the pet door.
Secondary Exterior Cover (Optional) – Hale Pet Doors allow for an optional secondary exterior cover for your pet door.
- PLEASE NOTE - If you decide to choose this option with your order, the manufacturer deems the order to be “custom” and because of this, the return policy changes. The return policy for “custom” orders allows you 50% credit towards the purchase of a new Hale Pet Door in the event that you return the original door you purchased.
- Secondary Exterior Cover Load Direction – You must choose a secondary exterior cover load direction if you choose to have a secondary exterior cover. The direction is determined by looking at the door from the exterior side. If you want both the interior and exterior to load from the same side, the exterior option should be the opposite from the interior. For example, if you choose a left loading cover from the interior, when looking from the exterior, that same direction from the interior is right loading from the exterior.

Product Specifications

Flap Material – Made of clear, flexible 3/16” PVC vinyl. Comes in single or double flap option
Pet Door Frame – Made of heavy-duty extruded aluminum with steel reinforced corners.
- Inner Frame - Made of two separate metal extrusions. Both metal pieces are 0.063” thick. Three of these sides entrap the security cover.
- Outer Frame – Made of extruded aluminum (6063-T5) with a wall thickness of 0.063”. Sleeves into the inside frame.
- Self-Framing – The Hale Pet Door self-frames, so no need to frame out any holes in the door. Fits doors 1 3/8” to 2” in thickness.
- Flange - Outer flange is 0.70” thinner than the inner flange to allow the frame to sleeve together.
Energy Efficiency and Sealing Value
- Double flap – The double flap option adds an extra layer of insulation for your home and extra protection against outside elements.
- Nylon Pile Weather Stripping – Hale Pet door flaps are surrounded by a ½” nylon pile weather stripping for added insulation. The nylon is woven into a backing that is 9/32” wide and 1/32” thick.
- Alnico 5 Magnets for sealing – Alnico 5 magnets are made from aluminum, nickel, and cobalt alloy. They are known for their strong magnetism which gives the flap strength and durability in its sealing. The number of magnets on the flap is determined by the flap size.
- Strikes – Manufactured out of ferrous stainless steel. The strikes are 1 ½” long, ¾” tall, and 1/32” thick. It is U-Shaped with interior prongs, and when squeezed onto the PVC vinyl flap, the barbed prongs hold firmly.
Security Locking Cover
- Security Cover – The security cover is made of ¼” thick King Starboard or 3/16” Lexan polycarbonate sheet, both of which are extreme shock and impact resistant. Security cover has a 3/8” diameter locking hole and a ¾” diameter handle hole. Can be installed inside and outside. Drill bits included.
- Pin Lock – The pin lock is mounted on the frame of the pet door. The pin lock secures the security cover in place with a ¼” diameter positive action steel pin encased with 5/32” thick fabricated plated steel.
Raincap
- Awning – An optional raincap or awning attachment is available. The raincap hooks to the outside frame for use in diverting water and preventing in from entering the pet door.
Carpeted Wall Tunnel
- Olefin Nylon Carpet – The Olefin nylon carpet that covers both the inner walls and bottom of the wall mount tunnel is stain, mold and mildew resistant. It also prevents any heat or cold transfer from the metal so your pet can walk through comfortably in any weather condition. Easy to clean with a vacuum cleaner!
Door Thickness Accommodation
- Sizing - The vast majority of doors are between 1 3/8" and 2" thick and our door model is designed to easily fit these doors. If your door is thicker than this, please order our wall model. If your door is between 5/8" and 1 3/8", you can still order our standard door but the door will need to be modified. A buildout will be required to add to your installation so that will space the door frames the correct distance apart.

Hale Pet Door 5 Year Warranty

Please see Hale Pet Door’s 5 Year Warranty Terms here

Shipping

Hale Pet Door Shipping Times

Hale Pet Doors ship via FedEx Ground from Canon City, Colorado. Please reference the map below to calculate shipping times.
Hale Door Mounts and Wall Mounts generally take 1-5 business days to manufacturer before shipping out.
Custom options on door and wall models can take 7-10 business days to manufacture.
All glass models, such as panels or windows, ship in 3-4 weeks due to manufacturing process.

Hale Pet Door Shipping Times

Sizing & Measurement

Sizing Chart

Size	Flap Opening	Rough Opening	Tip to Tip	Pet Weight	Pet Shoulder Height	Breed Examples
SMALL
Small	5 1/2" x 7 1/2"	7 3/8" x 9 3/8"	8 3/8" x 10 3/8"	Very small cats up to 8 lbs.	Up to 7"	Cats (very small only)
Small Medium	6 1/2" x 9 1/2"	8 1/2" x 11 1/2"	9 9/16" x 12 9/16"	Most cats, small dogs 6-12 lbs.	9"-13"	Cats, Chihuahua, Dachshund, Mini Poodle
Tall Small Medium	6 1/2" x 12 1/2"	8 1/2" x 14 1/2"	9 9/16" x 15 3/8"	Dogs 12-25 lbs	12"-15"	Mini Pinscher, Maltese
MEDIUM
Medium	8 1/2" x 12 1/2"	10 1/2" x 14 1/2"	11 9/16" x 15 3/8"	Dogs 10-35 lbs.	12"-15"	Terriers, Pug, Corgi, Shiba Inu
Tall Medium	8 1/2" x 16"	10 1/2" x 18"	11 9/16" x 19 1/16"	Tall Dogs 30-45 lbs.	15"-20"	Cocker Spaniel, Sheltie, Beagle
LARGE
Large	11" x 16"	13" x 18"	14 1/16" x 19 1/16"	Dogs 40-55 lbs.	15"-20"	Basset, Chow, Keeshond, Husky
Tall Large	11" x 19 1/2"	13" x 21 5/8"	14 1/16" x 22 9/16"	Taller Dogs 50-95 lbs.	21"-24"	German Shepherd, Labrador Retriever
Tall Large Plus	11" x 23 1/2"	13" x 25 5/8"	14 1/16" x 26 9/16"	Tall slender dogs to 110 lbs.	25"-27"	Standard Poodle, Irish Setter, Greyhound
Extra Tall Large	11" x 27 1/2"	13" x 29 5/8"	14 1/16" x 30 9/16"	Very tall, slender dogs to 120 lbs.	24"-31"	Afghan, Irish Wolfhound, Borzoi
EXTRA LARGE
Extra Large	14" x 19 1/2"	16" x 21 5/8"	17 1/16" x 22 9/16"	Large dogs to 120 lbs.	22"-24"	Rottweiler, Akita, Bulldog
Extra Large Plus	14" x 23 1/2"	16" x 25 5/8"	17 1/16" x 26 9/16"	Larger dogs to 150 lbs.	25"-27"	St. Bernard, Newfoundland
Giant	15 1/2" x 27 1/2"	17 5/8" x 29 5/8"	18 9/16" x 30 9/16"	Most Giant Breeds	25"-31"	Great Dane, Mastiff, Great Pyrenees

Measuring your pet for a pet door is quite simple. Follow the simple instructions below to accurately measure your pet in order to choose the right size for your pet.

Measuring Your Pet

Measure the Height

Measuring the height of your pet is simple. The height will be used to determine how high you can install the pet door. Grab a tape measure and measure from the ground to the tallest point of your pet’s back. We suggest adding an inch or two to this measurement just to be safe.
Measure the width of your pet

The width will be used to determine the width of the flap that you will purchase. All you need to do is open a door wide enough so that your pet can walk through comfortably. Once your pet walks through, measure that width of the opening and add an inch or two for safety.
Measuring the Step-Over / Rise

The step over or “rise” is the measurement from the bottom of your door or wall to the base of the pet door. This is basically the height that your pet must step over in order to get through the door. Please note that this measurement should be factored in with the pet’s height you measured earlier when choosing an appropriate pet door height. With step overs, the lower they are, the easier it is for the pet to get through. For dogs with health issues such as arthritis or are of old age, it is recommended that you have a small step over.

To summarize, here is a diagram of the measurements you should take:

Flap height + step over = total height. The total height should be at least 1" taller than the top of the pet's back

Measuring Your Door or Walls

Besides measuring your pet, you also have to measure your door or wall when installing a pet door. There are two measurements you must take into consideration: the rough opening size and the outer frame size. The rough opening size is the actual size of the hole that you will be cutting into your door or wall. Generally the inner frame of the pet door will fit in there. The outer frame measurement is the measurement of the outer framing of the pet door that’s usually a couple inches larger. For tight spaces, this outer frame measurement is important to know.

Outside frame dimension and rough opening measurement

Measuring for a Sliding Glass Door Pet Door

Measuring your sliding glass door is a must before purchasing a sliding glass door panel pet door. There generally isn’t a standard height for sliding glass doors and they can vary greatly from brand to brand.

Here’s how to measure:

Place the end of the measuring tape you use up inside the track as high as it will go and measure down a convenient distance and then draw a line with a pencil.

Then, put the end of the measuring tape down into the track towards the bottom and start measuring from the line you drew previously.

Simply add those two numbers together and you got your track height.

If you measure all at once, you might not get the most accurate number as the measuring tape curves towards the bottom. The different sizing ranges for panels is precise and if you happen to mis-measure, it will become a hassle.

Other Things to Consider When Choosing the Correct Size Pet Door

If you currently have a puppy or kitten, remember that they will continue to grow. Finding out the size that they will be approximately can help you make the right purchase. People often judge this based on their parents’ size.

Having a door that is mounted low gives more comfort for pets to step over. Young pets should have no problem going through a door, but as they age, having a higher step over can become an issue for pets with health issues.

Making sure the pet door is tall enough for your pet is also crucial with age as having a pet door that is too short will require hunching from your pet, which over time can be hard on your pet’s hips. Flaps will generally last longer too if the pet isn’t rubbing against the top part of the door as well.

If you have multiple pets, make sure that the door you get can accommodate all of them. It must be low enough for the shortest pet to step over but also tall enough for the tallest one to fit through comfortably.

Got any questions on measuring? We're here to help. Call us at (888) 557-PETS or send us an email at contact@petschoicesupply.com.

Installation Instructions

Hale Pet Door for Walls Installation Instructions

Click here for the Hale Pet Door for Walls Installation Instructions

Warranty

Hale Pet Door 5 Year Warranty

Click to see Hale Pet Door’s 5 Year Warranty Terms here